Back to Nano Products
Nano Urea Plus – Field Trials & Results
Comprehensive field trial results and application guidelines from multi-location studies
Multi-Location Trial Results (2021-2023)
Based on extensive field trials conducted across 21 locations in India covering diverse agro-climatic zones
Wheat
Crop Performance
| Zone | Yield Increase (%) | N Use Efficiency (%) | Economic Returns (₹/ha) |
|---|---|---|---|
| North Western Plains | 7.6% | 87% | +₹8,500 |
| North Eastern Plains | 8.0% | 89% | +₹9,200 |
| Central Zone | 5.5% | 85% | +₹7,800 |
| Peninsular Zone | 9.1% | 91% | +₹10,400 |
Rice
Crop Performance
| Treatment | Grain Yield (t/ha) | Increase over Control (%) | N Uptake (kg/ha) |
|---|---|---|---|
| Control (No N) | 4.2 | - | 28 |
| RDN (130 kg N/ha) | 5.9 | 40.5% | 65 |
| 75% RDN + Nano Urea Plus | 5.7 | 35.7% | 62 |
| 50% RDN + Nano Urea Plus | 5.1 | 21.4% | 48 |
Multi-Crop Trial Results
Comparative performance across different crop types
| Crop | Traditional Urea Yield | Nano Urea Plus Yield | Yield Increase (%) |
|---|---|---|---|
| Maize | 6.8 t/ha | 7.4 t/ha | 8.8% |
| Soybean | 2.1 t/ha | 2.4 t/ha | 14.3% |
| Cotton | 2.8 t/ha | 3.1 t/ha | 10.7% |
| Sugarcane | 78 t/ha | 85 t/ha | 9.0% |
| Mustard | 1.6 t/ha | 1.8 t/ha | 12.5% |
Average Yield Increase
11.1%
Best Performing Crop
Soybean
14.3% increase
Consistent Performance
All Crops
5-15% range
Nutrient Use Efficiency Data
Comprehensive efficiency metrics compared to conventional fertilizers
Nitrogen Use Efficiency
85-95%
vs. 30-35% for conventional urea
Nutrient Loss Reduction
65%
reduction in leaching losses
Volatilization Losses
70%
reduction vs. soil-applied urea
Key Efficiency Benefits
2.5-3x higher nitrogen use efficiency
Better synchronization with plant needs
Reduced environmental nitrogen losses
Minimal soil and water contamination
Recommended Application Schedule
Crop-specific application timings for optimal results
Cereals
(Wheat, Rice, Maize, Millets)
1st
Tillering stage (30-35 DAG or 25-30 DAT)
2nd
Pre-flowering (50-60 DAG or 45-55 DAT)
3rd
Optional for high N-requiring crops
Pulses
(Chickpea, Pigeon pea, Lentil)
1st
Branching stage (30-35 DAG)
2nd
Only for crops requiring higher nitrogen dose
Oilseeds
(Mustard, Groundnut, Soybean)
1st
Branching stage (30-35 DAG)
2nd
Pre-flowering (50-60 DAG)
Vegetables
1st
Branching/Transplanting (20-35 DAG/DAT)
2nd
Pre-flowering (40-60 DAG/DAT)
3rd
After each picking for continuous harvest crops
Cotton & Sugarcane
Cotton:
3 sprays at branching, squaring, and boll formation stages
Sugarcane:
3 sprays at early tillering, late tillering, and grand growth stage
Dosage and Dilution
Application Rate
250-500 mL per acre per spray
Dilution Rate
2-4 mL per liter of water
Water Volume
200-400 L per acre
(depending on crop growth stage)
Application Best Practices
- Timing
Early morning (6-10 AM) or evening (4-7 PM) - Weather Conditions
Avoid application during high wind or when rain is expected within 8 hours - Equipment
Use flat fan or cut nozzles for uniform coverage - Water Quality
Use clean, pH-neutral water (pH 6.0-7.5)
Safety Measures
Personal Protection
• Wear protective equipment (gloves, mask)
• Avoid contact with skin and eyes
• Wash hands thoroughly after handling
Storage Safety
• Ensure proper ventilation in storage areas
• Store away from heat and direct sunlight
• Keep container tightly closed
Application Safety
• Avoid application during peak sunlight hours
• Do not spray in windy conditions
• Keep children and pets away during application
Emergency
• In case of accidental ingestion, seek medical help
• Rinse eyes/skin with plenty of water if contacted
• Contact IFFCO helpline: 1800-103-1967